HomeMy WebLinkAboutOrd 1965-113 Platting of Subdivisions - Street Lighting•
•
•
•
ORDINANCE NO. 113-65
AN ORDINANCE OF THE VILLAGE OF NORTH PALM BEACH, FLORIDA, AMENDING THE REQUIREMENTS FOR
PLATTING OF SUBDIVISIONS IN THE VILLAGE; AND SETTING FORTH REQUIREMENTS FOR STREET LIGHTING
OF ALL LANDS HEREINAFTER PLATTED WITHIN THE VILLAGE, AND FOR OTHER PURPOSES.
BE IT ORDAINED BY THE VILLAGE COUNCIL OF NORTH PALM BEACH FLORIDA:
Section 1. The regulations for the platting of land and development of subdivisions
within the territorial limits of the Village as set forth in Ordinance No. 25 of said Village,
as supplemented and amended to date, are hereby further amended by the addition to said 0
Ordinance No. 25 of a new Section, to be known as Section 16, and which said Section shall
read as follows:
"Section 16. Street Lighting of all Lands Platted Within the Village.
1. Every plat of lands within the Village shall provide for the installation of
mercury vapor lamps of at least 7,000 lumens, installed on prestressed concrete poles
similar in construction and appearance to the existing concrete light poles presently located
in the Village, and in accordance with the specifications hereinafter set forth:
A. Light Poles
1. Precast, prestressed concrete poles.
2. Tinted light green; to be done by manufacturer at time
of pouring. Painting not acceptable.
3. Class 1 or Type I style of pole.
(a) Square with minimum dimensions of 8.9 inches x 8.9
inches at base and 4 inches x four inches at top.
(b) Minimum breaking strength 1200 lbs.
(c) Hollow core with borings to handle side mounted
lamp and bracket and underground lead.
4. 30 ft. high.
B. Fixture. Globe. Lamp and Photo Control
1. Globe and fixture to be Star -Lux Luminaires, Series 2330,
side mounting, or equal, as approved by the Building
Official.
(b)
(b) Automatic Latch type
(c) A.S.A.-I.E.S. Type light distribution of globe,
to be determined by the location of the light.
pole.
(a) 14 inch refractor and aluminum reflector, with
globe.
(d) Receptacle for photo cell on top.
II. Before any plat is accepted by the Village, in accordance with this Ordinance,
the subdivider shall
provide poles and lights to the specifications set forth above, together
with photo control unit, all necessary ballast, 7,000 lumen mercury vapor lamp, color corrected
6 foot mounting brackets or mast arms made of aluminum, 2-inch pipe size. A11 fixtures and
arms are to be aluminum; only galvanized hardware is to be used; electrical work is to be per-
formed in accordance with all Village Ordinances and subject to inspection.
•
•
•
•
ORDINANCE NO. 113-65
Page -2-
Underground leads to the pole shall be used, together with all necessary accessories to put
the light in operation. The plat shall also show on its face the location of the underground
electrical ditribution system alorg with the easements for such, the dedication of this under-
ground distribution system amd easements to the Village by proper dedication clause.
III. The street lights specified above shall be located at every intersection
within the newly platted area, with the,.exact corner to be as determined by the Village
Building Official and street lights to be placed at the end of every ctl-de-sac. There shall
be no more than 300 feet between light standards on any single street. These requirements
shall apply to all streets, alleys and service drives. The location of all light fixtures
must be shown on the plat plan at time of submittal and must be erected in accordance with
this Ordinance prior to final acceptance by the Village.
FIRST READING the 26th day of January, 1965.
SECOND, FINAL READING AND PASSAGE the 23rd day of February, 1965.
(SEAL)
ATTEST:
Village Clerk
MAYOR
•